S5P4418 System on Module

Introduction

G4418 system on module ( for short G4418 SOM ) is a product platform based on Samsung S5P4418 (A9 quad-core) chip that designed by Shenzhen Graperain Technology Co., Ltd. The G4418 SOM takes stamp hole system on module. It is so strong expandability, supports 184PIN, running 1.4GHz. PCB designed 8 layers in immersion gold, and is of best electrical specification and anti-interference characteristic, and work stable. It has PMU onboard, and with coulombmeter charging, integrating the gigabit Ethernet firstly. The system on module can be used in MID, POS, PDA, PND, smart home, phone, learning machine, game machine and other kinds of industrial control filed.
G4418 SOM takes 28nm craftsmanship, built-in high performance A9 ARM Quad core architecture, compare with Exynos4412, S5P4418 supports mostly format video decoding, and onboard LVDS and RGB double channels display control interface. Its resolution ratio is 2048*1280. Meanwhile it integrates the Gigabit Ethernet controller onboard.

Structural Parameters

1. Appearance: Stamp hole

2. System on module dimensions: 52mm*52mm*3mm

3. Pin pitch: 1.1mm

4. Pin pad size: 1.3mm*0.7mm

5. Pin quantity: 184 PIN

6. Process: 8-layer gilding process design
System Configuration

CPU: S5P4418, quad core Cortex-A9, 1.4GHz

Memory: Single channel DDR3 design, 1GB standard configuration, 2GB customizable

Storage: 4GB/8GB/16GB/32GB eMMC optional, 8GB standard configuration

Power IC: use AXP228, support dynamic frequency modulation, coulometer, etc.

Ethernet: RTL8211E Gigabit Ethernet PHY
Interface Parameters

LCD interface: support TFT, LVDS, MIPI interfaces

Touch interface: capacitive touch, resistive touch

Audio interface: AC97/IIS interface, supporting audio recording and playback

SD card interface: two SDIO output channels

eMMC interface: onboard eMMC interface, pins are not led out separately

Ethernet interface: support gigabit Ethernet

USB HOST interface: one channel HOST2.0, one channel HSIC

USB OTG interface: one OTG2.0

UART interface: 4 serial ports, 3 outgoing ports, and flow control serial ports

PWM interface: 4-channel PWM output

IIC interface: 2 channel IIC output

SPI interface: 1 channel SPI output

ADC interface: 2 channel ADC

Camera interface: 1 channel BT656/BT601, 1 channel MIPI CSI

VGA interface: expand with LCD output interface

Boot config.: No, the system on module boot automatically
Electrical Characteristics

Input voltage: 3.7~5.5V (5V input is recommended)

Output voltage: 3.3V/4.2V (power supply for carrier board and charging battery)

Storage temperature: -40~80 ℃

Operating temperature: -30~70 ℃
Other

System support: Android, Linux, Ubuntu and other systems

Name	Document	Memory	Download
G4418 System on Module Introduction	pdf	885.7KB